«HURRICANE» - Solid carbide milling cutter - Unequal helix
Ref : S09












The Hurricane brings into the milling market a technological headway thanks to its specific geometry with an unequal center cutting and unequal helix of 35° and 38°. This new technology decreases vibrations significantly, so that in finishing operations the surface finish is largely better than with a standard 4 flute cutter. In slotting operations, it’s now possible to increase the axial depth of cut (Ap) up to one time the diameter (Ae = D and Ap = D), with increasing nearly 30% the feed rate (Vf). That’s why the material removal rate is largely higher than a solid carbide ripper cutter. Furthermore, the quality of the surface finish of the Hurricane, as it has no roughing profile, is a lot better than with a ripper cutter. The Hurricane cutter is a very versatile tool as regards the applications (roughing by slotting or profiling and finish) and it is also suitable for a large choice of materials like soft steels, alloyed steels, cold work tool steels, stainless steels, heat resistant steels, nickel/chrome/cobalt alloys, titanium and titanium alloys. Thanks to its versatility and efficiency, the Hurricane increases productivity
Submicrograin Solid Carbide 0,2µ density 12% Cobalt | |
4 flutes centre cutting | |
Tool shank tolerance h6 | |
D-4 Coating | Coating with a better resistance to wear-off, a better heat stability and an exceptional hardness at heat 3200HV |
Supernova | K5000-U together with a D4 coating allow to work the molds, tempered steel, dry machining at high speed. Furthermore this range is rebalanced after cutting to assure optimal performances at hight speed. |
Matter | Type |
---|---|
STEELS |
AUSTENITIC STAINLESS 1200 N/mm2
FERRITIC STAINLESS 700 N/mm2
from 1300 to 1600 N/mm2
from 1000 to 1300N/mm2
|
TITANE |
PURE
|
LOG IN TO ACCESS YOUR ACCOUNT
Designation | Ø tools | shank Ø | Useful length |
Total length |
Stock | Price |
---|---|---|---|---|---|---|
S09 D03 Carbide milling cutter Hurricane | 3 | 3 | 8 | 38 | / | 26,27 € |
S09 D04 Carbide milling cutter Hurricane | 4 | 4 | 12 | 50 | 1 | 27,52 € |
S09 D05 Carbide milling cutter Hurricane | 5 | 5 | 13 | 50 | 76 | 28,76 € |
S09 D06 Carbide milling cutter Hurricane | 6 | 6 | 13 | 57 | 211 | 32,52 € |
S09 D07 Carbide milling cutter Hurricane | 7 | 7 | 16 | 60 | 3 | 47,53 € |
S09 D08 Carbide milling cutter Hurricane | 8 | 8 | 19 | 63 | 111 | 52,53 € |
S09 D09 Carbide milling cutter Hurricane | 9 | 9 | 19 | 67 | 4 | 65,04 € |
S09 D10 Carbide milling cutter Hurricane | 10 | 10 | 22 | 72 | 154 | 71,30 € |
S09 D12 Carbide milling cutter Hurricane | 12 | 12 | 25 | 83 | 168 | 98,81 € |
S09 D14 Carbide milling cutter Hurricane | 14 | 14 | 26 | 83 | 11 | 137,58 € |
S09 D16 Carbide milling cutter Hurricane | 16 | 16 | 32 | 92 | / | 162,59 € |
S09 D18 Carbide milling cutter Hurricane | 18 | 18 | 32 | 92 | 6 | 206,37 € |
S09 D20 Carbide milling cutter Hurricane | 20 | 20 | 38 | 104 | 36 | 256,40 € |
4.5 | / | 34,09 € |
DELIVERY DELAY
For the products out of stock, please contact us
Other products

«METEOR» SPECIAL INCONEL - Solid carbide milling cutter - Unequal helix,...
Ref : S12
MORE

GPIS09
Ref : GPIS09
MORE

S064R
Ref : S064R
MORE

Solid carbide milling cutter - Unequal helix
Ref : S07
MORE

SUPERNOVA micro cutter
Ref : S320
MORE

SUPERNOVA milling cutter - Parabolic flute
Ref : STCN
MORE

SUPERNOVA micro cutter
Ref : S220
MORE

GPIS10
Ref : GPIS10
MORE

S063
Ref : S063
MORE

Solid carbide milling cutter with radius - Unequal helix
Ref : S08
MORE

«HURRICANE» Torique - Solid carbide milling cutter with radius - Unequal helix
Ref : S10
MORE

S062R
Ref : S062R
MORE